Renusol FS Pro
Professional as always.
Prepared for tomorrow.
The new standard for flat roofs
Renusol FS Pro
pre-assembled for economical projects
The Renusol FS Pro flat roof system features a high degree of pre-assembly:
- The ridge and eave supports are already attached to the base rail
- The building protection mat is pre-glued
- Set up the ridge support. It locks automatically.
- Connect rail sections with locking bolts.
- Ballasting
- Position modules, fasten the clamps and wire the modules
- Done
Renusol FS Pro
Learn more!
Renusol FS Pro
assembly video
The universal flat roof solution
The key advantages for you
Universal solution
Many application options with a well-designed system
High-quality
High-quality and robust components for safe use (20-year warranty if designed with PV Configurator 3.0)
High degree of pre-assembly
Pre-assembly saves time on site, so that our new system can be set up 30% faster than the previous system
Universal solution
Variants & applications
- Reasonable with high and low angle of solar incidence (South and North Europe)
- Fairly low load capacity of the roof (because lighter)
- Optimised use of the roof spacepv
- Optimal for own consumption (Energy production more continuously distributed over the day)
- For high and medium solar incidence (e.g. South and Central Europe)
- Full covering of the roof surface is not reasonable (e.g. because of limited own consumption or limited funding)
- For low solar incidence (e.g. North Europe)
- Full covering of the roof surface is not reasonable (e.g. because of limited own consumption or limited funding)
- For high snow and wind loads.
- Available for the Renusol FS Pro 10-S, 18-S and 10-EW.
- We use the portrait variant to achieve the maximum roof occupancy for you.
- Available for the Renusol FS Pro 10-S and 10-EW.
- The Renusol FS Pro system can be attached to trapezoidal sheets with special self-tapping screws or components from the MS+P product range.
- Available for the Renusol FS Pro 10-S and 10-EW.
- The system of the system can be secured with roof fasteners. No additional ballast is required for systems that are fixed exclusively with roof fasteners.
- Available for the Renusol FS Pro 10-S and 10-EW.
- The optionally available side panels give the system an aesthetic appearance.
- Available for the Renusol FS Pro 10-S and 10-EW.
- For the equipotential bonding of the FS Pro system earthing clips are utilised.
- The rail sets are pre-assembled for standard modules widths of 1100-1152 mm.
- For other module dimensions, the ridge support can be moved effortlessly.
High-quality
High-quality and robust components for safe use
NO MOVEMENT OF THE SYSTEM UNDER LOAD
State-of-the-art wind tunnel tests (in accordance with the guidelines of the German Wind Technology Society) ensure that your system will not move, even as a result of climate change and increased wind loads.
STATIC RELIABILITY
We have statically calculated all components of the system and an independent engineering office performed third party evaluation.
A SECURE HOLD FOR THE BALLAST
Ballast blocks ensure that the pv array is not lifted off or moved during storms. To achieve this, it is crucial that they are properly connected to the mounting system. We make sure of this by using high-quality ballast sets that make the ballast stay where it belongs.
Easily secured
We have put plenty of development and detail work into the one-piece locking bolt. It is secured by simply secured it into the rail channel and works without additional items such as springs or nuts being required.
Easily mounted
We have fitted the eave support with a lower stop for correct module alignment and quick installation. Position the module and slide the module frame to the stop of the eave support. Your module is immediately mounted correct and in a visually appealing way.
Easily balanced
The patented safety bolt and the eave support are both products of German engineering. In the event of module expansion due to temperature fluctuations, the articulated attachment of the eave support allows for compensation. This protects your solar modules.
High degree of pre-assembly
Pre-assembled to minimise effort on the construction site
Thanks to the high degree of pre-assembly, you can install the system 30% faster than non-pre-assembled systems. This reduces additionally the risk of errors during installation so that you can implement your projects faster, more securely and more economically than before.
Frequently asked questions
- 10° South, 18° South, 10° East/West
- Modules can be mounted in landscape or portrait orientation.
- The module can be clamped on the long side
All current commercially available module sizes ranging from 990 mm – 1300 mm in width and up to 2400 mm in length.
Yes, it is part of the system and can be adapted and expanded according to the technical requirements. You will need items R500260 (Renusol FS Pro equipotential bonding clip S) and R500261 (Renusol FS Pro equipotential bonding clip EW) for the electrical connection of the base rails. The module frames can be earthed with item R900268 (P-Clip).
You can calculate this in our free Renusol PV Configurator 3.0 online. The PV Configurator 3.0 automatically determines the wind and snow loads at the project location and calculates the necessary ballast based on these and other boundary conditions such as building parameters, module size, etc.
- Thanks to the high degree of pre-assembly, the installation of 10 south-facing modules will take around 10-15 minutes, depending on the conditions.
- The installation of an east-west system with 10 modules will take about 8-10 minutes.
The system price depends on several parameters such as the module, geometry of the module field, etc. You can calculate an exact price with the PV Configurator 3.0.
The system will be available from the first quarter of 2024.
The system's high degree of pre-assembly greatly reduces the number of system components. The ridge and eave supports and the building protection are already pre-assembled on the base rails. Plug-in bolts for connecting the rails as well as wind deflectors and brackets are also required. The modules are attached to the system with our module clamps.
The Renusol FS Pro system is suitable for all types of flat roofs, including roofs on residential buildings, industrial buildings, garages, etc. The system can also be used on level and stable ground. In the latter case, however, a growth barrier must be laid beforehand. Foil roofs, bitumen roofs, gravel roofs and green roofs are suitable roof coverings. The system can also be installed on trapezoidal sheet metal roofs or secured through the roof with special roof fasteners.
For roof pitches of up to 5°, ballasting alone is sufficient. For higher roof pitches, the system must be secured through the roof with special roof fasteners.
Frost-proof concrete blocks can be used for ballasting. Please refer to the installation instructions for possible dimensions.
The system can be screwed onto trapezoidal sheets and sandwich profiles. For this purpose, the system can be combined with the Renusol MS+ system. Please refer to the assembly instructions for assembly details.
Roof fasteners (e.g. Nicholson Rooftrak IFPs, etc.) can be used to secure the system in position. No additional ballast is required for systems that are fixed exclusively with roof fasteners.
With a module inclination of 10° and landscape alignment, optionally available side plates (R 500265) can be fitted to the row end. These can prevent birds from nesting.
Clips and cable ducts are available to route string cables. We recommend articles R 500262 and R 900035 for this purpose. For details, please refer to the assembly instructions.
For the United Kingdom, flat roof systems are not required to undergo MCS certification. Certifications for France (ETN) and Germany (DIBt) are in progress.
Renusol gives a 20-year warranty on the system, in accordance with the warranty terms and conditions. In particular, a project design must have been carried out using the PV Configurator and the system must have been installed accordingly.
We regularly offer training courses. To make an appointment, please contact ts@renusol.com.
