SHORT RAIL

Material saving solar installation on trapezoidal sheet. Without continuous rails.

VERTICAL PV MODULE ORIENTATION

PV modules with a frame height of 30 to 50 mm are attached to the MS + P mounting system in portrait (standing) on the trapezoidal sheet.

INSTALLATION WITHOUT PILOT DRILLING

Self-tapping screws fix the MS+P PV mounting system directly to the trapezoidal sheet.

 

 

FOR TRAPEZOIDAL STEEL AND ALUMINUM METAL SHEET

Readymade kits are suitable for the installation of PV systems on trapezoidal sheet steel and / or aluminum in various thicknesses.

MS+P (350mm) Stahl Stärke 0,40-1,13mm / Aluminium Stärke 0,50-1,50mm
MS+P (400mm) Stahl Stärke 0,40-1,13mm / Aluminium Stärke 0,50-1,50mm
MS+P (350mm) Stahl und Aluminium Stärke 0,80-6,80mm

YOUR BENEFIT

All inclusive or DIY

Choose from optimized standard rails with assembled sealing strip or DIY (Do it yourself!) with longer rails (up to 3.600mm).

Decide for yourself whats best for your storage, your transport and your projects.

Compatible with the RS1

The RS1 is end- and midclamp in one. It is height adjustable and secures framed PV modules of 30 to 50 mm height.

 

 

For all rib distances

By continuous grooves fixing is possible at any desired location through the assembly profile. This makes it simple to work on trapezoidal sheet with different rib intervals.

SYSTEM DATA

Material: Aluminum
Applicable with: Sheet metal
Roof covering: trapezoidal sheet
Material of roof sheet: Aluminum, Steel
Min. width of rib: 20 mm
Module orientation: Vertical (portrait)

ITEM DATA (KIT)

[] Artikelnummer: 420420
Gewicht: 0,342 kg
Schienenlänge: 350mm
Schraube Ø: 6,0mm
Material Trapezblech: Stahl, Aluminium
Blechstärke Aluminium: 0,50 - 1,50mm
Blechstärke Stahl: 0,40 - 1,13mm
[] Artikelnummer: 420421
Gewicht: 0,386 kg
Schienenlänge: 400mm
Schraube Ø: 6,0mm
Material Trapezblech: Stahl, Aluminium
Blechstärke Aluminium: 0,50 - 1,50mm
Blechstärke Stahl: 0,40 - 1,13mm
[] Artikelnummer: 420422
Gewicht: 0,334 kg
Länge: 350mm
Niete Ø: 6,0 mm
Material Trapezblech: Stahl, Aluminium
Blechstärke Stahl und Aluminum: 0,80-6,80mm

ITEM DATA (DIY)

MS+P 3,600mm without EPDM

Item no.: 400405
Weight: 2.829 kg
Length: 3,600mm
Certification: TÜV ID:48970

[Translate to EN:] MS+ EPDM Rolle 5m für MS+P

[] Artikelnummer: 300224
Gewicht: 0,075 kg
Material: EPDM

[Translate to EN:] Bohrschraube für Aluminium 0,50-1,50mm oder Stahl 0,40-1,25 MM

[] Artikelnummer: 400280
Material: Edehlstahl
Schraube Ø: 6,0 mm
Schraubenkopf: Linsenkopf
Spitze der Schraube: Bohrspitze
Blechstärke Aluminium: 0,50-1,50mm
Blechstärke Stahl: 0,40-1,25mm
Antrieb: SIT 30
Zertifzierung: DIBt Z-14.1-537, MCS012 IK0197/02, TÜV ID 48970, DIBt Z-14.1-4

[Translate to EN:] Niete 6,4X14

[] Artikelnummer: 900270
Material: Aluminium
Niete Ø: 6,4mm
Blechstärke Stahl und Aluminium: 0,50-2,00mm
Zertifzierung: ETA 13/0255