FS10-S

The simple and efficient PV mounting system for flat roofs, with a 10° inclination for orientation to the south.

Ideal for flat roofs with a bitumen or foil roof covering.

FS18-S

Also available with an 18° inclination and increased space between rows for optimized yields.

Good price/benefit ratio thanks to the economic use of materials in the design of all three options.

FS10-EW

East/west flat roof mounting system with a 10° module inclination and no roof penetration.

Only two additional components are required to convert the system from south facing to east west, making storage significantly easier.

APPLICATION VARIANTS

Flexibly adaptable to specific situations

 

 

FS10-EW under heavy snow loads
FS10-S under heavy snow loads
FS10-S on a trapezoidal sheet roof

YOUR BENEFITS

Ideal solutions – for logistics and on site

Consistently simplified with very few components. The various mounting solutions all have a modular structure.

  • All systems use the same supports in the eaves
  • Identical connectors, building protection mats and screws
  • Clamps for all framed modules with frame heights between 30 and 50 mm

Well-considered components – speedy construction

The well-considered design of the flat roof product family makes the mounting process much easier compared with conventional mounting solutions.

  • Innovative rail connectors – without nuts
  • High mounting tolerance
  • Layout simplified by pre-drilled holes – installation requires next to no measuring

Short rails

Thanks to the short support rails, the installation adapts to the surface of the roof like a chain.

The innovative rail connectors counterbalance any potential consequences of temperature expansion.

  • A range of rail lengths for each system depending on the shadow angles
  • Easy to transport both in storage and on site

SYSTEM DATA

FS10-S FS18-S FS10-EW
Module alignment South South East/west
Module inclination 10° 18° 10°
Module width 950 – 1050 mm 975 - 1010 mm 950 – 1050 mm
Row spacing 1490 oder 1740 mm* 1840 oder 2090 mm* 2360 mm (between 1st and 3rd module)
Shadow angle 12° oder 17.5° * 14.5° oder 17.5°* -
Minimum edge distance 0.6 m 0.6 m 0.6 m
Product warranty 10 years 10 years 10 years

  * depending on the choice of support rails

DOWNLOAD

Innovative connectors without nuts
FS10-S project in Dartford
FS18-S construction in Gothenburg

Flyer

Installation manual

General information for mounting PV systems on flat roofs

System datasheet

FS10-EW

Certificates

TÜV FS10/18-S

Image data

Artikel

System